For balconies, walkways or any areas that require an anti-skid finish, silica sand or mineral slate chippings can be applied to the Ultra-Flex.

Your choice of material will depend on the level of anti-skid that is required for your application.

Once the first coat of Ultra-Flex waterproofing membrane is dry, apply masking tape to the area where the finish is needed, and then apply the second fine coat of Ultra- Flex to the already fully cured system.

Broadcast the chippings on to the already wet surface, and once the area is fully covered, immediately remove the masking tape.

Sweep away any loose chippings once the product has dried.

For more information, see our full application video: