Ultraflex balcony system is designed for fast application, allowing traffic or pedestrian access and causing the minimum disruption. The use of Quickcure creates a chemical reaction and accelerates the curing time of Ultraflex liquid membrane.
Application of balcony system
- Apply following general recommendations detailed on Ultraflex application instructions, including temperature checks and substrate preparation recommendations.
- Priming with ULTRAPRIME PRO. Open the 2 components and mix thoroushly. Apply a layer of 150 – 200grs to all area to be coated. Once Ultraprime is dry in about 2 hours it will be ready to be coated.
- Open Ultraflex drum and the QUICKCURE and mix thoroughly for 2 minutes before using. Apply the mixed Ultraflex on a wet on wet system, at a minimum coverage rate of 1.5kg per m2. Drying time will be approx. 2 hours depending on weather, fully cured in 24 hours.
Coverage: A drum of Ultraflex will cover 8 to 10 sqm depending on the surface.
- ULTRATOP WR: Mix the 2 components thoroughly and apply a layer of Ultratop topcoat for glossy finish once the Ultraflex is fully cured and no later than 48 hours after Ultraflex application.